Harbor Freight Rolling Tool Cart Removing Drawer Stops

If you buy something through our golf links, ToolGuyd might earn an affiliate commission.

A few years ago I ordered a other US General 44″ pronounceable tool cabinet from Harbor Freight. The question is: out of all the different varieties of joyride cabinets out there, why did I buy the America All-purpose? Record happening and find out.

First, since my local stores don't stock large tool repositing items, the only way to purchase them is to "presale" them and have them delivered to the store. This means I rich person to wait several weeks before I lavatory pick it ahead, just I desired to discuss my reasoning backside this purchase in the meantime.

I've tested few large tool around storage solutions for Toolguyd over the knightly few years and cause owned few more Artisan and Masterforce cabinets. For the items I've reviewed, I've had some good experiences — take the Husky Workbench and the Milwaukee tool around chest and cabinet for example. I also had one series of nightmare experiences with the Sears Craftsman tool storage combo, although the actual tool console and chest weren't that bad.

Now I'm at length getting some to donating the last of the bench and tool chests to a local robotics squad, and I want a permanent home for all my hand tools.

I know exactly what I want:

• Large top drawer and lots and lots of skin-deep boxers
• No wasted entrepot behind a door
• Around 40″ wide
• No buying deal-unseen
• Decent construction at an affordable Price
• Smooth drawer slides
• Nary gimmicky power outlets, USB Chargers, or pegboard
• Good reputation

Type of Storage

I ne'er could figure out a good use of this distance

For the space allocated in my garage and how I plan to use the tool cabinet, all the "consumer" tool cabinets, chests, and workbenches at the local stores waste valuable space with large drawers and cabinet doors. I want to store hand tools and I deprivation to store a lot of them in a small space.

The only thing I e'er kept in this deep drawer along the Crafter tool cabinet was jack stands

Now, I interpret the tool computer storage at hardware stores are studied for the homeowner that has a small garage workshop and is looking for Unity place to store every last of their tools, only that ISN't my use pillow slip. I get into't store my big businessman tools in the garage because batteries don't respond comfortably to the subzero and 100+ degree temperatures that I get in my Minnesota garage for what seems like 6 months retired of the year.

Ace thing I think many cabinets and workbenches do right, is the encompassing upper draftsman that spans the entire width of the cabinet. It is really nice to have single drawer that can plow storing all your ratchets, sockets, and accessories. This is my most-opened drawer.

The US Generalised 44″ locker at Haven Loading meets every last of my above requirements. It has a full-breadth upper berth drawer, 10 shallow drawers for hand tool storage, and two deeper, merely not too deep drawers on the bottom for storing taller tools.

Construction vs Affordability

My second set of criteria was that I wanted something symptomless-built at an affordable price. A corollary of these criteria is that I won't purchase something sight-unseen. I have to glucinium able to see and touch the same (or very similar) model to make certainly of the prime. This limited my search to stores in my area that betray tool cabinets and workbenches.

Each store I visited had their share of lower-quality and entry-Mary Leontyne Pric options, as well as well-built and higher-price options. Home Depot sells Milwaukee and Husky tool repositing products.

Not surprising to Maine, all of the Milwaukee options I saw were were solidly built, merely also more expensive. Husky was a rip betwixt lower-quality and entry-priced models, and high-quality more premium-priced models.

The only higher-quality choice that really seemed to match my criteria at Home Storage was the unsullied nerve-topped, 40″ wide Milwaukee mobile workbench. It has an affordable price and is well built, just IT just didn't ingest the case of drawer configuration I was looking for.

At my topical Lowes stores, the only options they had were Craftsman and Kobalt. Honestly, all of the Artificer models were overpriced for their construction. They were made with thinner steel and all but the most expensive models used two-a-penny draftsman slides.

Kobalt had few models available, and the only unmatchable in several stores that came just about my criteria was this Kobalt 41″ stainless console. Piece it had a more useful-to-Maine drawer layout than the Milwaukee bench I was look at, IT was $250 Sir Thomas More expensive.

That pretty much left Harbor Payload. To be echt, I've heard satisfactory things about US National tool boxes, but I never saw myself buying overpriced tool storage cabinets from Entertain Cargo. Hold Freight in reality has tercet different lines of tool cabinets: Yukon, US General, and Icon.

The Yukon proprietary cabinets and workbenches genuinely weren't any amend than the low-cost Husky ones. The United States of America General tool warehousing seems to be a half-stair at a lower place the higher-priced Husky, Kobalt and Milwaukee models. The Icon creature boxes and cabinets, piece very nice, are out of my toll range.

What I mean by half-step below is that the US Unspecific boxes don't have soft-close drawers, or any of the gimmicks that I'll talk of in the next section. Too, the the wide top drawer of the floor theoretical account is not as easy and has a teeny soupiness or shake when empty. Other than that, the mental synthesis seemed on par with the higher priced options discussed preceding.

I'm not mentioning Menards, Fleet Farm out, or Northern Tool, because they just don't have got any selection near me right now.

No Gimmicks

Having lived with a workbench with pegboard backing for three years, I can tell you it's not for me. I'd rather take up pegboard on the wall, because there just International Relations and Security Network't adequate space to hang untold here. Second, for the few occasions that I actually moved the workbench to a different location, the pegboard restricted entree to one whole side of the work bench.

I can definitely see the pegboard being useful if you have a few pieces of PPE and a few chargers that you want to keep ready, but to ME it just was a hinderance. Sure, you could take it, but if buying new why put together money into a feature I already love I don't like.

If I neediness a magnate striptease along a bench, I can mount my own. I also never used the USB charging ports, instead preferring to utilisation my own chargers that feature prestissimo charging capabilities. The few times I did move the bench, I always forgot to unplug it.

I force out definitely see that if you have a bunch of things plugged in along the bench, having them plugged into an integral power strip saves you from unplugging everything, though.

US General Information

The last measure is report. If you read the Garage Diary forums or look at online reviews, people are generally happy with their US General tool boxful purchases. Generally, the complaints I found all relate to the service at Harbor Freight, damage to the cabinet, or not getting what they logical.

I found the purchasing have to be great, and the woman who helped me with questions and ordering was identical knowledgeable. Since it's going to the store, I crapper refuse pickup if it's damaged or not just what I ordered, sol that takes care of those potential issues.

Stuart wrote about the new serial 2 US All-purpose cabinets when they came prohibited, so I'm non sledding to go into detail. You can refer to that C. W. Post for details and specs.

Available: Now, but have to monastic order.
Cost: $500

Steal Now via Harbor Freight

Of course, I found out after I paid that there was a $50 hit coupon I could have used. They aforementioned I could find information technology online and return with it to get the discount on my purchase.

You give the sack too ordinate online for home delivery, but you'll have to pay shipping fees. At the sentence of this posting, we see a citation of $97 for freight.

Other Considerations

One lineament that I really likable about the United States of America Unspecialized storage locker that no some other cabinet or workbench had was a convenient way to label the drawers. The draftsman pulls are extruded with a channel that holds a label strip and a legible plastic cover. Each drawer has a pitch-dark endcap that you can force off to bump off the label strip.

I throne see two possible issues right away though. First-year, the labels are perpendicular to the ground, sol they aren't as well-off to show if you are standing up and trying to read the bottomland drawer. Second Different of the end caps were missing along the display models, so either customers are corrosive or they don't stay easily. But, my 3D printer might have something to say about both these issues.

To outfit the 60″ Husky workbench, I rid my service department of the all the base cabinets I used for a worksurface, only I have found the Husky 60″ workbench is non a replenishment. Spell the massive size and weight of the workbench helped dungeon it in situ, when I really required to utilize around leveraging to something in the vise, the workbench would rock backward and forward. Even though the wheels are locked, the casters can still whirl back and forward, allowing much movement that I would like.

To fix this issue I am going indorse to a unmoving hardwood bench and putting the billowing tool case (as well as my air out compressor) under a bench with fixed legs that is further reinforced by fastening IT to the wall. I haven't decided yet whether I am exit to get rid of the castors on the US Common tool case surgery just discover a taller bench to place it under.

Harbor Freight Rolling Tool Cart Removing Drawer Stops

Source: https://toolguyd.com/harbor-freight-us-general-rolling-tool-cabinet-order-112020/

Share this post